2GB 256M x 64-Bit PC3-10600
CL9 240-Pin DIMM
256M x 64-bit 2GB (2048MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM)
memory module, based on eight 256M x 8-bit DDR3-1333 FBGA
components. The SPD is programmed to JEDEC
standard latency 1333Mhz timing of 9-9-9 at 1.5V. This 240-pin DIMM
uses gold contact fingers and requires +1.5V.
FEATURES:
JEDEC standard 1.5V0.075V Power Supply
VDDQ = 1.5V0.075V
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 5,6,7,8,9,10
Posted CAS
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with
starting address 000” only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly
using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibrationInternal self calibration through ZQ pin
(RZQ240 ohm1%)
On Die Termination using ODT pin
Asynchronous Reset
1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
PCBHeight 1.180” (30.00mm), single sided component
Do you want to show products of your own company? Join FREE now!